Xiaomi Mi Router 4C (4RCM) Chinese to Global Version Update and Change Language to English

Joynul Abadin Rasel
October 28, 2024

 


Introduction:
The Xiaomi Mi Router 4C (4RCM) is a powerful, budget-friendly router with excellent range and performance. However, the Chinese version of this router can be challenging for non-Chinese users due to the default Chinese language interface. Updating it to the global firmware can give you an English interface and access to additional features. This guide provides step-by-step instructions to help you switch your Xiaomi Mi Router 4C from the Chinese version to the global version.

Description:
Updating the Xiaomi Mi Router 4C from the Chinese to the global version requires downloading and installing the correct firmware. This process involves accessing the router’s settings, flashing the firmware, and configuring it for use. Follow these steps carefully to ensure a successful update.

Step 1: Download the Global Firmware
To get started, download the global firmware for Xiaomi Mi Router 4C from a trusted source.

  1. Visit the official Xiaomi support page or a reliable forum for the router firmware.
  2. Download the correct firmware file and save it on your computer.
  3. Make sure the firmware is specifically for the Xiaomi Mi Router 4C to avoid compatibility issues.

Step 2: Access the Router Settings
Next, you’ll need to access the router’s web interface to upload the firmware.

  1. Connect your computer to the router via Wi-Fi or an Ethernet cable.
  2. Open a web browser and enter the router’s IP address (usually 192.168.31.1).
  3. Log in using your admin credentials (default username and password are both usually admin or printed on the router label).

Step 3: Upload the Firmware
Once you’re logged into the router, you’ll need to upload the firmware.

  1. In the router settings, look for the System Update or Status section.
  2. Choose the Update Manually option and select the firmware file you downloaded.
  3. Click Update Now to start the installation. Do not disconnect the router or turn off your computer during this process.

Step 4: Set the Language to English
After the update, the router should reboot with the global firmware.

  1. Log in again to the router’s web interface.
  2. Go to the Settings > Status > Language option and set it to English.
  3. Configure your network settings as needed.

Step 5: Reset the Router (Optional)
If any issues arise, consider performing a factory reset.

  1. Press and hold the reset button on the router for 10 seconds.
  2. This will reset the router to the default settings, now with the global firmware installed.

Download Link:
Download Xiaomi Mi Router 4C Global Firmware

Watch Tutorial:
For a visual guide on updating your Xiaomi Mi Router 4C to the global version, watch my detailed YouTube tutorial. Follow along as I demonstrate each step in real-time to ensure a smooth upgrade process.






Conclusion:

Updating your Xiaomi Mi Router 4C from the Chinese to the global version provides a better user experience, especially with the English interface and extra features. Following this guide will help you complete the update safely and make the most of your router’s capabilities. For additional support, check out the video tutorial linked above.



Tags:
#XiaomiRouter4C #RouterFirmwareUpdate #GlobalFirmwareUpdate #XiaomiRouterGuide #XiaomiMiRouter4C #TechTutorial #RouterLanguageUpdate #XiaomiFirmware #RouterUpdateGuide #XiaomiGlobalVersion